multi choice quiz

From WikiEducator
Jump to: navigation, search
Chainsaw video production

Objective

Demonstrate knowledge of the chainsaw cutting unit and identify chain components by name and function:

Activity

Multichoice Quiz


Icon qmark.gif

Multichoice Quiz

 

1. Left and right cutters are designed to

a. give maximum cutting efficiency
Correct.
b. give minimum cutting efficiency
Incorrect, try ...
c. give moderate cutting efficiency
Incorrect, try ...

2. Side links (straps) run along the guide bar rails and also

a. act as racers between the cutters and the drive links
Incorrect, think about...
b. act as spacers between the cutters and the drive links
Correct.
c. act as spacers between the cutters and the drive tangs
Incorrect, think about...

3. Drive links (tangs) travel through the guide bar groove and mesh with the sprocket which

a. provides ignition to the spark plug
Incorrect, think about...
b. provides the driving power to the bar guide
Incorrect, think about...
c. provides the driving power to the chain
Correct.

4. Rivets that join all the chain components together, act as bearings allowing flexible movement of the

a. anti-vibration devices
Incorrect, think about...
b. chain around the bar
Correct.
c. bar groove
Incorrect, think about...

5. What controls the thickness of the chip that is removed by each cutter during the cutting action?

a. depth gauges
Correct.
b. drive tang
Incorrect, think about...
c. side links
Incorrect, think about...

6. A chisel chain is

a. square
Correct.
b. round
Incorrect
b. triangular
Incorrect

7. A chisel chain is used for cutting

a. soft wood
Correct.
b. hard wood
Incorrect.
c. semi-hard wood.
Incorrect.

8. The chisel chain profile will cut

a. fast
Correct.
b. slow.
Incorrect.

9. Semi-chisel are used for

a. hard wood
Correct.
b. soft wood
Incorrect.
c. anything that has grit or dirt on the surface.
Incorrect.

10. Semi-chisel will hold sharpness better on hard timber or gritty material.

a. true
Correct.
b. false
Incorrect.

11. What type of sprocket has open teeth that mesh with the dive links on the chain?

a. Spur sprocket
Correct.
b. Rim sprocket
Incorrect.
c. Wheel sprocket
Incorrect.

12. A sprocket that fits over a spline and is attached to the clutch dum aligned for sideways movement is called?

a. Rim sprocket
Correct.
b. Spur sprocket
Incorrect.
c. Wheel sprocket
Incorrect.

13. True or false: Chain pitch is the measurement between any three rivets divided by 2.

a. False
Incorrect.
b. True
Correct.

14. True or false: Gauge is a measurement used to make sure the drive links on a chain match the width and depth of your bar groove.

a. False
Incorrect.
b. True
Correct.

15. Which cutting components must be properly matched for pitch?

a. Throttle and lockout
Incorrect.
b. Drive tang and bar
Incorrect.
c. Chain and sprocket
Correct.

16. Which cutting components must be properly matched for gauge?

a. Spur sprocket and drive link
Incorrect.
b. Chain drive tang and the bar
Correct.
c. Chain and sprocket
Incorrect.

17. What is a jointing tool?

a. a tool used to join the bar to the bar nuts
Incorrect.
b. a rivet used to join the drive tangs to the bar groove
Incorrect.
c. a rivet tool used for joining chain
Correct.

18. What is a file guide?

a. A tool in a store that directs you to the files
Incorrect.
b. a tool used for chain sharpening which will help you achieve the correct cutter angles
Correct.
c. a file used for chain sharpening which will help you achieve the correct cutter angles
Incorrect.

19. What is a stump vice?

a. a tool used for bracing a log while cutting.
Incorrect.
b. a tool used to stack stumps.
Incorrect.
c. a portable tool that can be hammered into a stump and used to brace the saw by the bar for sharpening.
Correct.

20. What tools are used to measure cutter lengths?

a. calipers or an adjustable spanner
Correct.
b. screw driver or spark plug wrench
Incorrect.
c. a file or depth gauge guide
Incorrect.

21. True or false: flat files are never used to lower depth gauges or dress the bar

a. True
Incorrect.
b. False
Correct.

22. True or false: Round files are used for sharpen left and right cutters, and can be any size:

a. True for sharpening cutters, but false for any size
Correct.
b. False for sharpening cutters, but true for any size
Incorrect.
c. True
Incorrect.

23. a sprocket tip bar is commonly used in forestry because?

a. It makes for a stronger and adjustable bar
Incorrect.
b. it reduces wear on the chain by keeping the side links clear of the bar rails
Correct.
c. It is easier oil and gives better cutting performance
Incorrect.

24. a solid nosed bar is..?

a. commonly used in forestry for its strength and reduction of chain wear
Incorrect.
b. has hardened rails on the tip to reduce chain wear
Correct.
c. very common in the forest industry
Incorrect.

25. Uneven cutter lengths are caused by:

a. chain wear
Incorrect.
b. cutting in poor conditions
Incorrect.
c. poor sharpening technique
Correct.

26. Uneven cutter lengths are caused by:

a. chain wear
Incorrect.
b. cutting in poor conditions
Incorrect.
c. poor sharpening technique
Correct.

27. Chain needs tensioning to manufactures specifications when:

a. the chain skips during operation
Incorrect.
b. the chain will not move
Incorrect.
c. when it visually sags from the bar
Correct.

28. The chain is worn when:

a. there is excessive movement in the rivets and no life left in the cutters.
Correct.
b. it breaks during operation
Incorrect.
c. it jams or skips during operation
Incorrect.

29. The chain needs lubrication to:

a. prevent over heating and maintain free movement in the rivets.
Correct.
b. to prevent smoke being generated during operation
Incorrect.
c. remove rust
Incorrect.

30. The drive and nose sprocket is worn when:

a. there is obvious wear seen on the sprockets.
Incorrect.
b. uneven movement of chain around the bar, noticeable when sharpening.
Incorrect.
c. there are signs of heating on the nose sprocket
Incorrect.
d. all of the above
Correct.

31. Depth gauges that are set too high:

a. cause poor cutting performance and should be filed down.
Correct.
b. cause aggressive cutting and should be filed down.
Incorrect.
c. cause signs of heating on the nose sprocket
Incorrect.

32. Damaged and worn guide bars:

a. may have chipped rails.
Incorrect.
b. worn bar groove or cracks.
Incorrect.
c. all of the above
Correct.

Your score is 0 / 0

Support materials