Artistic media two dimensional art/ART102/Painting
Three of the most recognizable images in Western art history are paintings: Leonardo da Vinci’s Mona Lisa, Edvard Munch’s The Scream and Vincent van Gogh’s The Starry Night. (See images at right.) These three art works are examples of how painting can go beyond a simple mimetic function, that is, to only imitate what is seen. The power in great painting is that it transcends perceptions to reflect emotional, psychological, even spiritual levels of the human condition. Painting as a medium has survived for thousands of years and is, along with drawing and sculpture, one of the oldest creative mediums. It is used in some form by cultures around the world.
Painting mediums are extremely versatile because they can be applied to many different surfaces (called supports) including paper, wood, canvas, plaster, clay, lacquer and concrete. Because paint is usually applied in a liquid or semi-liquid state it has the ability to soak into porous support material, which can, over time, weaken and damage it. To prevent this a support is usually first covered with a ground, a mixture of binder and chalk that, when dry, creates a non-porous layer between the support and the painted surface. A typical ground is gesso.
There are six major painting mediums, each with specific individual characteristics:
- encaustic
- tempera
- fresco
- oil
- acrylic
- watercolor
All of them use three basic ingredients:
- pigment
- binder
- solvent
Pigments are granular solids incorporated into the paint to contribute color. The binder, commonly referred to as the vehicle, is the actual film-forming component of paint. The binder holds the pigment in solution until it is ready to be dispersed onto the surface. The solvent controls the flow and application of the paint. It is mixed into the paint, usually with a brush, to dilute it to the proper viscosity, or thickness, before it is applied to the surface. Once the solvent has evaporated from the surface the remaining paint is fixed there. Solvents range from water to oil-based products like linseed oil and mineral spirits.
Let’s look at each of the six main painting mediums.
Encaustic paint mixes dry pigment with a heated beeswax binder. The mixture is then brushed or spread across a support surface. Reheating allows for longer manipulation of the paint. Encaustic dates back to the first century C.E. and was used extensively in funerary mummy portraits from Fayum in Egypt (below left). The characteristics of encaustic painting include strong, resonant colors and extremely durable paintings. Because of the beeswax binder, when encaustic cools it forms a tough skin on the surface of the painting.
Encaustic painting has seen resurgence in use since the 1990’s. Modern electric and gas tools allow for extended periods of heating and paint manipulation. Below right is a recent example of an encaustic piece from 2009.
Mummy portrait from Roman Egypt, 2nd–3rd century CE, Louvre Museum, Paris
Martina Loos, Untitled, 2009, encaustic and hotpen
Tempera paint combines pigment with an egg yolk binder, then thinned and released with water. Like encaustic, tempera has been used for thousands of years. It dries quickly to a durable matte finish. Tempera paintings are traditionally applied in successive thin layers, called glazes, painstakingly built up using networks of cross hatched lines. Because of this technique tempera paintings are known for their detail.
In early Christianity, tempera was used extensively to paint images of religious icons. The pre-Renaissance Italian artist Duccio (c. 1255 – 1318), one of the most influential artists of the time, used tempera paint in the creation of The Crevole Madonna . You can see the sharpness of line and shape in this well-preserved work, and the detail he renders in the face and skin tones of the Madonna.
Duccio, The Crevole Madonna, c. 1280. tempera on board. Museo dell'Opera del Duomo, Siena, Italy
Close-up of The Crevole Madonna
_-_WGA06710.jpg)
Contemporary painters still use tempera as a medium. American painter Andrew Wyeth (1917-2009) used tempera to create Christina's World, a masterpiece of detail, composition and mystery.
_-_The_Last_Supper_(1495-1498).jpg)
There are two forms of fresco: buon or “wet”, and secco, meaning “dry”. Buon fresco technique consists of painting in pigment mixed with water on a thin layer of wet, fresh lime mortar or plaster. The pigment is applied to and absorbed by the wet plaster; after a number of hours, the plaster dries and reacts with the air: it is this chemical reaction that fixes the pigment particles in the plaster. Because of the chemical makeup of the plaster, a binder is not required. Buon fresco is more stable because the pigment becomes part of the wall itself.
Domenico di Michelino’s Dante and the Divine Comedy from 1465 is a superb example of buon fresco. The colors and details are preserved in the dried plaster wall. Michelino shows the Italian author and poet Dante Aleghieri standing with a copy of the Divine Comedy open in his left hand, gesturing to the illustration of the story depicted around him. The artist shows us four different realms associated with the narrative: the mortal realm on the right depicting Florence, Italy; the heavenly realm indicated by the stepped mountain at the left center – you can see an angel greeting the saved souls as they enter from the base of the mountain; the realm of the damned to the left – with Satan surrounded by flames greeting them at the bottom of the painting; and the realm of the cosmos arching over the entire scene.
Secco fresco refers to painting an image on the surface of a dry plaster wall. This medium requires a binder since the pigment is not mixed into the wet plaster. Egg tempera is the most common binder used for this purpose. It was common to use secco fresco over buon fresco murals in order to repair damage or make changes to the original. Leonardo Da Vinci’s painting The Last Supper was done using secco fresco.
.jpg)
_-_Bouquet_in_a_Clay_Vase_-_WGA3599.jpg)
Some of the qualities of oil paint include a wide range of pigment choices, its ability to be thinned down and applied in almost transparent glazes as well as used straight from the tube (without the use of a vehicle), built up in thick layers called impasto (you can see this in many works by Vincent van Gogh, e.g., at right and here). One drawback to the use of impasto is that over time the body of the paint can split, leaving networks of cracks along the thickest parts of the painting. Because oil paint dries slower than other mediums, it can be blended on the support surface with meticulous detail. This extended working time also allows for adjustments and changes to be made without having to scrape off sections of dried paint.
In Jan Brueghel the Elder’s still life oil painting you can see many of the qualities mentioned above. The richness of the paint itself is evident in both the resonant lights and inky dark colors of the work. The working of the paint allows for many different effects to be created, from the softness of the flower petals to the reflection on the vase and the many visual textures in between.
Richard Diebenkorn’s Cityscape I from 1961 shows how the artist uses oil paint in a more fluid, expressive manner. He thins down the medium to obtain a quality and gesture that reflects the sunny, breezy atmosphere of a California morning. Diebenkorn used layers of oil paint, one over the other, to let the under painting show through and a flat, more geometric space that blurs the line between realism and abstraction.
Georgia O’Keeffe’s oil paintings show a range of handling between soft and austere to very detailed and evocative. You rarely see her brushstrokes, but she has a summary command of the medium of oil paint.
The abstract expressionist painters pushed the limits of what oil paint could do. Their focus was in the act of painting as much as it was about the subject matter. Indeed, for many of them there was no distinction between the two. The work of Willem de Kooning leaves a record of oil paint being brushed, dripped, scraped and wiped away all in a frenzy of creative activity. This idea stays contemporary in the paintings of Celia Brown.
The American artist Robert Colescott (1925-2009) used acrylics on large-scale paintings, for example Feeling His Oats. He used thin layers of under painting, scumbling, high contrast colors and luscious surfaces to bring out the full range of effects that acrylics offer.
Watercolor paintings hold a sense of immediacy. The medium is extremely portable and excellent for small format paintings. The paper used for watercolor is generally of two types: hot pressed, which gives a smoother texture, and cold pressed, which results in a rougher texture. Transparent watercolor techniques include the use of wash, an area of color applied with a brush and diluted with water to let it flow across the paper (example of wash). Wet-in-wet painting allows colors to flow and drift into each other, creating soft transitions between them. Dry brush painting uses little water and lets the brush run across the top ridges of the paper, resulting in a broken line of color and lots of visual texture (example of dry brush).
John Marin’s Brooklyn Bridge (1912) shows extensive use of wash. He renders the massive bridge almost invisible except for the support towers at both sides of the painting. Even the Manhattan skyline becomes enveloped in the misty, abstract shapes created by washes of color.
Jacob Lawrence’s paintings use gouache to set the design of the composition. Large areas of color – including the complements blue and orange, dominate the figurative shapes in the foreground, while olive greens and neutral tones animate the background with smaller shapes depicting tools, benches and tables. The characteristics of gouache make it difficult to be used in areas of detail.
Gouache is a medium in traditional painting from other cultures too. Parable of the Ship of Shi'ism, part of an illuminated manuscript form 16th century Iran, uses bright colors of gouache along with ink, silver and gold to construct a vibrant composition full of intricate patterns and contrasts. Ink is used to create lyrical calligraphic passages at the top and bottom of the work.
Enamel paints form hard skins typically with a high-gloss finish. They use heavy solvents and are extremely durable.
Powder coat paints differ from conventional paints in that they do not require a solvent to keep the pigment and binder parts in suspension. They are applied to a surface as a powder then cured with heat to form a tough skin that is stronger than most other paints. Powder coats are applied mostly to metal surfaces.
Epoxy paints are polymers, created mixing pigment with two different chemicals: a resin and a hardener. The chemical reaction between the two creates heat that bonds them together. Epoxy paints, like powder coats and enamel, are extremely durable in both indoor and outdoor conditions.
These industrial grade paints are used in sign painting, marine environments and aircraft painting.
Name a painting medium and list one or two main components found in it. Give an example of a painting done in that medium.
Note: Your comment will be displayed in the course feed.
